CoreFrame mini Faketec node
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular enclosure for Faketec with a flat (LiPo) battery. Panels can be customized.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 33
- Makes
- 0
- Views
- 305
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Share Alike
Filament Type: PLA
Infill: 15%
Layer Height: 0.16 mm
Supports: Everywhere
Components used:
ProMicro NRF52840 Development Board (Nice!Nano V2.0 compatible)
SX1262 module
FAKETEC PCB
SMA to IPEX (IPX) pigtail cable
GIZONT antenna
Flat LiPo battery 803048
3-4 screws (used whatever was available)
Assembly:
Connect the ProMicro board to the FAKETEC PCB using pin headers (PLS), then trim the pins after soldering.
Notes:
I used a 4 cm pigtail, but space is very limited.
There may be issues with the panels, as they fit onto the frame worse than in the original larger model.
Future improvements:
Once the power switch and BMS protection arrive, I will try to integrate them into the model.