LayersFactory
Report model
1 / 8
MORPHIUS² - TOOLHEAD — image 1
1 / 8

MORPHIUS² - TOOLHEAD

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

MORPHIUS_LABS

MORPHIUS_LABS

@MORPHIUS_LAB_1522989

- Dual Fan Toolhead inspired by XoL - BIQU NEBULA Extruder - DROPEFFECT NextG Hotend - EDDY NG TAP Z - XY Klick Endstop

Rating
0 / 5
Likes
6
Downloads
16
Makes
0
Views
295
Reviews
0

Updated at source:

Model information

Source
Printables
Category
Other Printer Parts & Upgrades
License
GNU General Public License v3.0
DetailsFiles (23)Makes & comments (Makes: 0) (Comments: 0)Remixes (0)Collections (13)Related

Assembly instructions

Has been added as .PDF

Configurations:

will follow...

Important! You will loose a bit on the X-axe because of the Side. My maximum possible was 336 mm from left endstop to the right with leaving safety space of 2-3mm each side.

BOM (incomplete):

What you need to buy:
You can find links for them at the bottom

  • DROPEFFECT NextG Hotend (or other with same fitment)

  • Eddy DUO (with Canbus)

  • BIQU NEBULA EXTRUDER

  • BIQU EBB36 Toolheadboard

  • MantaM8P Mainboard at least V1.1(Or any other mainboard that's able to use Canbus)

Screws and parts:

  • 4 x M2,5 x 6 - Extruderadapter + Dropeffect NextG

  • 4 x M3 x 5 - Fanduct to Baseplate

  • 4 x M2,5 x 18 - Hotend Fan

  • 4 x M2,5 x 4 - 4010 fans

  • 2 x M3 x 25 - Extruderadapter + Cablemanager

  • 2 x M3 x 2,5 - Cablemanager P1 + P2

  • 1 x M3 x 12 - Extruderadapter + Baseplate

  • 4 x M3 x 5 - Extruderadapter + NEBULA Extruder

  • 2 x M3 Nuts

  • 2 x M3 x 20 + 6 longshaft Nuts 

  • 10x M3x4x5 Heat insert -> Baseplate

  • 1x M3x6x5 Heat insert -> Extruder Adapter

  • 2x M3x4x5 Heat insert -> Cablemanager 

  • 4 x magnets 6x3 Facecover -> Baseplate

Tools:

  • Grease (to grease the Gantry and also the turningtower parts)

  • Glue (to glue the magnets)

  • Soldering Iron (for alle the soldering work, LEDs, Heatinserts, cables)

  • Klippers (for cables and stuff)

  • Heat shrink tubing (recommended for all the newly made connectors and solderings)

  • Filamenttube Heatresistent (For the connection between NEBULA Extruder and Hotend)
    Normally delivered inside the Box of the NEBULA Extruder

Links:

Tags

upgradenebuladragchaingantrytoolheaddragchainmountdragchainlinkeddysv08sovolsv08eddyprobemountdropeffectnextgnebulaextruderturningtower