[REMIX] Magnetic MMU Bypass with M10 connectors
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified magnetic MMU3 bypass to work around filament getting stuck in M5-PC4 pneumatic connector
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 12
- Makes
- 0
- Views
- 83
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
Thanks so much to @Kasekuchen for their original work!
While using their MMU3 bypass (standalone for now, as I don't have a MMU3), I noticed that the filament kept getting stuck in the bypass coupling. To remedy this, I replaced the original M5 thread with an M10 thread, to allow the use of M10-PC4 pneumatic connectors. PC4 PTFE tubes can pass completely through the connector, eliminating one source of snags.
Additionally, I slightly modified the corner part to include a kind of “double funnel”, which points the ends of the PTFE tubes straight at each other, with as little play as possible.
These two changes combined make for a very smooth transition in my setup.
The remix uses the same 3x8mm magnets, but I've left out the center ring magnets, since my setup hasn't needed them so far. If anyone has problems, tell me, and I'll add a slot for those! The M10-PC4 connectors are readily available on Amazon.
The "cross" part can be printed without supports, with the filleted face facing down. The corner part needs supports, however. I've personally had great success using organic supports, but this is personal preference.
While attaching the PTFE tube to the removable “cross” part, I recommend attaching it to the corner part, in order to get the depth of the PTFE tube just right, for a snug fit.
EDIT: I finally got around to making the plate that goes on the MMU3, so this remix is now actually functional and can be used as intended. And only two months late! Way to go, me!
Also, I think it's worthwhile to mention that this mod works with the Ultimulti (can be found here:)
If you decide to combine the Ultimulti with this mod, you also won't have to tear out the heat-set insert from the Prusa printed attachment plate, so you can rebuild the stock MMU3 without issues.