IP2368 PD 100W bi-directional module panel mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Panel mount for IP2368 100w bidirectional buck-boost module
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 6
- Makes
- 0
- Views
- 104
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Panel mount for IP2368 100w bidirectional buck-boost module. I've created this with enough space to install heat-sink on bottom of the board.
Even with heat-sink, the module get very hot when I set it to 60w so for higher wattage active cooling is needed.
The design was a bit tricky because the board didn't have any mount point or screw holes, but this worked for me.
There are 4 models included:
Bottom cradle
Top cradle
Outer panel for presentation
Cutout template to help draw lines on the panel you need to cut
To install the board on the cradle you'll need 2 zip-ties, and for mounting to your panel you'll need 2 M3x8 or longer machine screw with 2 M3 nuts.