Ennoid XLITE-V4 32 Low Profile Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A low profile cover to protect the small components from damage in tightly packed enclosures.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Designed to fit the Ennoid XLITE-V4 32 BMS. This low profile cover provides minimal protection to the smaller components in tightly packed enclosures with a bunch of crammed wires around it. Originally designed for the Quality Pint S project.
Features:
Small peepholes allow for reading the LEDs without removing the cover.
Six posts are scattered around the underside to stabilize the cover against the PCB on some empty spaces.
The screw hole feet are designed to be as slim as possible, so you will not have to change the length of your BMS mounting screws.
Instructions:
Print upside-down with tree supports for the feet. Use flat cutters to carefully remove the supports from the feet, so as not to break them off. Check fitment on your BMS, there may be small variations in real-world component size and/or printer calibration.
0.2mm ABS yields good results.