1 / 10
Barbell Butler (Barbell Cleaning Setup Block)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Block used for holding an olympic barbell during cleaning. 2 slot sizes - collar and shaft.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 104
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Nobody likes a dirty barbell! The Barbell Butler is a set of two (2) 3D printed blocks for holding up your barbell during cleaning/oiling. There are two openings: one at 30mm for the shaft, and one at 50.5mm for the sleeves.
These work with all standard Olympic barbells, as well as most specialty bars. The back of the Butlers has two embedded neodymium magnets so they can be stored on your rack or metal peg board when not in use.