MRC Wall Mount Hook
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed for the MRC Thunder King, Desert Thunder, or Baja King. Holds the vehicle on the wall using its Rear Bumper.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This bumper hook is made of 2 pieces; the hook itself and a wall strip. Install the wall strip using screws on a wall stud or with appropriate wall anchors. Slide the hook over the top of the strip, make sure screw heads are recessed flat in the strip.
-
Filament: Inland PLA Black
Printed On: MK3S+ (probably prints faster on a newer machine)
Print Bed: Smooth Steel Sheet
Bed Temp: 60c
Nozzle: 0.4mm
Nozzle Temp: 215c
Layers: .030mm (.007in)
Infill: 30% Rectilinear
Perimeters: 5
Solid Layers Top: 3
Solid Layers Bottom: 5
Supports: I use these settings from BOBSTRO on the Prusa Forums and they work well for me, on both PLA and PETG.
Style: Snug
Top Contact Z Distance: 0.25mm
Pattern: Rectilinear
Pattern Spacing: 3mm
Top Interface Layers: 4
Interface Pattern: Rectilinear
Interface Pattern Spacing: 0.2 mm
XY Separation: 75%