MRC Wall Mount Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for the MRC Thunder King, Desert Thunder, or Baja King. Holds the vehicle on the wall using its Rear Bumper.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This bumper hook is made of 2 pieces; the hook itself and a wall strip. Install the wall strip using screws on a wall stud or with appropriate wall anchors. Slide the hook over the top of the strip, make sure screw heads are recessed flat in the strip.
-
Filament: Inland PLA Black
Printed On: MK3S+ (probably prints faster on a newer machine)
Print Bed: Smooth Steel Sheet
Bed Temp: 60c
Nozzle: 0.4mm
Nozzle Temp: 215c
Layers: .030mm (.007in)
Infill: 30% Rectilinear
Perimeters: 5
Solid Layers Top: 3
Solid Layers Bottom: 5
Supports: I use these settings from BOBSTRO on the Prusa Forums and they work well for me, on both PLA and PETG.
Style: Snug
Top Contact Z Distance: 0.25mm
Pattern: Rectilinear
Pattern Spacing: 3mm
Top Interface Layers: 4
Interface Pattern: Rectilinear
Interface Pattern Spacing: 0.2 mm
XY Separation: 75%