Liczymy pasujące modele…
3/8th BSP plug to neaten up buzz bars or bank sticks. I uploaded the step file so it can be modified to suit the diameter of your buzz bars for a nice flush fit. The stl has a 20mm head which was perfect for my buzz bars.
Unscrew the mic shock a little and insert this where the old stand insert goes and you're good to go
Easy to print and put together. PLS DOWNLOAD and LIKE! THANK YOU FOR SUPPORTING ME IN MY ADVENTURE OF 3D MODELING! MRC.
John Deere 3020 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A single M1x6mm screw…
This is my first model of a Naval Canon made in and around thw 18th Century. I used reference images in order to make this, and this is my first attempt at doing so in Blender. I would have liked to put wooden textures on to the frames,…
John Deere 3020 NFE (Narrow Front End) - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A…
John Deere 4020 NFE (Narrow Front End) - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A…
I designed and printed these characters as a special gift for the Cub Scout pack ("Lobinhos") of the Grupo Escoteiro do Ar América 58/PR in Brazil. The Jungle Book characters are central to their program, so I wanted to create something…
Hello everyone! This is my remix of N8thin 's beautiful X-shot MPP Stock-ish Stock model. I loved the stylings and feel of their stock, but I wanted a version that was a little bit longer to fit me better. So, that's what I set out to…
Check valve with 5/8ths inch barbs. Works with 5/8ths inch ID garden hose. Uses 2 o-rings; 19mm OD x 2.5mm, and 29mm OD x 1.5mm (Amazon)
John Deere 48 Front Loader - 1:8th Scale Made to fit the 3020 and 4020 tractors I have modeled. Uses M2 and M4 Screws. Indents indicate where holes need to be drilled out. Would love to see pictures of your makes!
John Deere Rear Wheel Rims - 1:8th Scale Made to fit the Scale Models 1:8th scale tractor. Will also fit the 1:8th scale John Deere 4020 and 3020 models I have available. However, since the rims needed to accommodate the OEM tire, there…
Farmall H Steel Wheel Set - 1:8th Scale Made to fit the Scale Models 1:8th Farmall H.
The original Dishwasher Clean/Dirty Sign is great, but once printed and mounted on the door we found it WAY to large & intrusive. This remix is 1/8th the size, and with that, the knob has been made 100% longer for better grip. The mount…
Using Camo Starter Clips , it's difficult to get the proper gap between deck boards. Specifically, Fiberon composite decking used with the Camo Edge Clips hidden deck fastener system . The Fiberon manufacturers install instructions call…
This model is a small decoration for the women's day with Articulated Rose model placed on a figure of 8 (for the woman's day on 8-th of March). 10x2 magnets are to be glued on the back to mount it on the fridge. The bench is just…
Celebrate an 18th birthday in retro gaming style! This set includes 4 different pixel art designs for cake toppers: "Press START", "LEVEL", "GAME OVER", and "LEVEL UP". The model is optimized for multicolor printing
I made this Wallmount for the iPad 7th gen. Should also fit 8th and 9th gen I made the fitment a bit tight so nobody could just pull it out. (still possible with force but be careful)
I have included the obj files if anybody wants to adjust it for there own needs. as this is my first remix it was made in tinkercad (still need to learn fusion 360) it is simple but functional. I printed it with the same settings I used…
Got board so i made this wheel for my 1:8th R/C nitro car. Better to be printed with a raft as well as supports.
Don't have acces to a 3D printer ? You can purchase them here ! This is a 3d model of some Lego compatible F40 style rims to use on 1/8th scale cars, specifically on the Ferrari F40 by Loxlego , but they should work on other models like…
Easy to break the original part and unavailable the replacement at the moment. Print Setup: 0.2 layer height 0.4 nozzle ABS Put a piece of filament (about 10mm) and glue it into the small hole as you see on the second picture.
Really, you shouldn't print this. Make it from cardboard or similar. I wanted to try and learn FreeCAD and use up some ancient filament, so figured “why not”. If you do want to print this, I'd suggest printing 4 with one side facing up…
Just like dad/grandpa had at the farm growing up. This 1:8th scale tractor is sure to be a show stopper on your display or shelf. Uses M4 and M2 Screws
Oliver 77 Row Crop - 1:8th Scale Assembly instructions in the download section Uses M4 and M2 Screws
only requires four self-drilling screws easy to print on the small printers too! HAVE FUN!
A simple adapter from 3/8ths inch Microphone stand thread to the three-prong mount system used on GoPro and similar Action camera accessories. Printed in Prusament PETG black.
Fontaine Renegade-Magnitude Trailer - 1:18th Scale Uses M4, M2, and M1 Screws Uses two 6.4mm (0.25in) x 120mm (4.75in) Rod for axles Need to make 24 Outrigger Parts
Catholic High Mass 18th Century Censer Cross at Top is removable cap.
Cake topper created for someone's 18th birthday. Model size is ~215x140x2mm but can be resized in your slicer. Prints perfect in PLA, and i usually use 100% infill since it's only 2mm thick. You can fit 2 pieces on one Prusa Plate Should…
Transcraft Eagle Stepdeck Trailer - 1:18th Scale Uses M2 screws Uses two 6.4mm (0.25in) x 120mm (4.75in) Rod for axles Included in file are alternate tool boxes with diamond plate façade. Larger parts divided to fit on 400mm x 400mm print…
Go to hardware shop, get 1/8th inch steel rod, pause print, insert rod, stronger axle, good times, have fun.
this is a fridge is great for if you are going to make a overland set up for your mini rig! ENJOY! PLS DOWNLOAD TO HELP MY PROFILE GROW. THANKS!!
House inspired by house seen in Jewish ghetto in Trebic town in Czechia. Similar houses appeared all over Central Europe, from Germany to Poland. It is modelled based on 19th century look, but it can work both for earlier and later time -…
Replacement wing for Haiboxing 1/18th scale rc car, truck thing
Easy to print and put together. PLS DOWNLOAD and LIKE! THANK YOU FOR SUPPORTING ME IN MY ADVENTURE OF 3D MODELING! MRC.
Easy to print 2 files. Glue together the pieces. THANK YOU! MRC.
John Deere 4020 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A single M1x6mm screw…
Original Idea: https://www.printables.com/model/1162678-valentines-mothers-day-mama-rose Many thanks to : https://www.printables.com/@Drak
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 139.66x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm…
For commercial license subscribe to my Patreon or Printables Club ! https://Patreon.com/Plastic3D Surprise someone special with a 3D printed bouquet that never wilts! 🌷🌹 Whether it's for International Women's Day, a birthday, or just to…
This is part of my SwarmBot build, details of which can be found at https://skippy.org.uk/swarmbot-introduction/ This is the Caster that I designed for the first version, it takes a 3/8th inch ball-bearing and makes it into a caster.…
I designed those brackets to do the sunroof delete on my 8th Gen Civic Si sedan. The brackets are made for a 1/8-inch ABS sheet. There are 3 variations of my design. Front, side, and rear. All the brackets are designed to use an m5 bolt…
The rear AC vents were in my way of doing the battery relocation. So I took the vents out and designed this block off plate to cover the opening from the front AC box looking thing. It fits snugly, and I printed it with PETG
John Deere 3020 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A single M1x6mm screw…
John Deere Rear Wheel Weights - 1:8th Scale Uses M3 screws
John Deere Front Slab Weights - 1:8th Scale Designed to fit on 1:8th Scale John Deere tractors produced by Scale Models. Uses M2 Screws to attached to tractor. Holes will need to be drilled and tapped on tractor.
International Harvester IH Rear Wheel Weights - 1:8th Scale Designed to fit 1:8th scale International Harvester tractors produced by Scale Models Uses M3 screws to attach to tractor. Holes will need drilled and tapped in the wheel rims to…
International Harvester IH Rear Wheel Split Weights - 1:8th Scale Designed to fit 1:8th scale International Harvester tractors produced by Scale Models Uses M3 screws to attach to tractor. Holes will need drilled and tapped in the wheel…
Tired of dealing with a sagging sun visor? I've found a solution for you - a delete cover that fits for factory mounting hole perfectly.
This is my first model of a Naval Canon made in and around thw 18th Century. I used reference images in order to make this, and this is my first attempt at doing so in Blender. I would have liked to put wooden textures on to the frames,…
Print the main body with support. The assembly is a bit tight, use some tweezers if needed. The Mainbody is connected to the blaseplate with M4 screws with hexagon sockets. I used this LED-lights:…
For 45lb power lifting/Olympic bars , or bars with 28mm+ shafts, use “Barbell rack holder - normal 29mm bar” For 15lb smaller/curl bars , use “Barbell rack holder - small curl bar.” The other mount will fit fine for these, but this one is…
Case 930 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 8.875in (6.4mm x 255.4mm) rod used for rear axle M2 rod used for steering wheel
LG BL-48TH Rechargeable Li-ion Battery 3.8 V Model
Holds 3/8" drive metric Quinn socket set from harbor freight.
18th Birthday Cake Topper 🎉🎂 Celebrate the big milestone in style with this sleek "18" cake topper – perfect for birthdays, debut parties, or any sweet eighteenth celebration! Designed to sit beautifully atop cakes, this topper adds a…
Olympiakos 48th League Title Commemorative 3D Printed Phone Stand Celebrate Olympiakos’ historic 48th Greek League Championship with this exclusive 3D printed phone stand. Designed in striking red and detailed with a premium gold stamp,…
John Deere 530 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 8.75in (6.4mm x 222mm) rod used for rear axle 4mm rod used for steering wheel (Used an M4 Screw…
The first installation of a cycliq camera will require quite a bit of force, in my experience. That rounds off the edges of the lock bumps. After that, it seems to be nice & firm I printed flat with a 0.6mm nozzle, no supports, 0.3mm…
This is one of my brackets for my Cycliq cameras. Mount style ‘C’ refers to the bolt counterbored straight down from the mount face, and with the locating pyramid/pin hole. Designed for an M4x20 SHCS This bracket can be used with my…
I couldn't find anything for tires for 1/18th scale RC cars so I took a picture and rendered a 3d model off the orginal tires. Do with them what you please, if you modify them just share it for everyone if you can. I like to see what…
I invented and fine-tuned this design 5 or 6 years ago. I made some tire-bolts for myself, but also provided some to RC-friends, to clubs who could sell them and earn a buck, … My friends are using them for years now. I usually share all…
Simply slice and print, I've printed mine out of PETG with a brim to avoid warping, but I'm sure a well-tuned printer doesn't need the brim The based box is generated via the gridfinity fusion360 plugin and I've basicallly fit the inside…
Wall mount for an 8th gen iPad. Two print options: all in one, for bigger printers left and right separately
My first upload! Hope whoever prints it enjoys it as much as I did, the figure is 5cm tall and is perfect for modelling
This is a quick design of a flange to fit on the early ford idle valves. It converts the port size to tappable 1/8th NPT holes for easy adaptability. Its not perfect, but it worked great for my project. I Printed using PLA at 195 C, with…
This is a clean 2D 3D-printable model of the Honda Civic Hatchback 8th generation (2006–2011), designed for fans of JDM and modern classics. The model can be used as a keychain, wall art, or just a cool display piece on your desk. It…
Детальна 3D-модель військової нашивки 68-ї бригади. Розроблена для 3D-друку як колекційний предмет, сувенір або для особистого використання. Модель має високоточний рельєф та оптимізована для друку FDM/PLA. Ви можете масштабувати модель…
This model is perfect for any cake. It can be customised and fitted to any size cake. The design is uniform and designed to be scaled up and down to fit all cake sizes. Print with a 0.2 layer height. It can easily be sprayed painted, as…
Printed in ASA with 5 line thick walls. in alpha V1.1 uses 30mm upgraded mount for Starlink Gen3 mOunt by Rob lackie (can print both on 250MM^2 plate) V1.0 model leverages 1 5/8ths (~41mm) post unclegeek v3 mount working to validate this…
Glue your mini-z tires to the rim and then place it on the appropriate side piece until it dries.
Different movement tray formats for skirmish units in Warhammer Fantasy (8th and 9th edition). These trays are designed to help you organize and move your miniatures more easily on the battlefield. Available tray sizes: For 20mm bases:…
Add an O-ring, #324 to the bottom the cap, too! Print in PCCF, PC, or PP for autoclavable.
my printer is probably over extrusing so there may bee some slack How to install : used cura hihi SETTINGS Filament : ABS or better, not PLA >:( Support : ON Infill : 100% !!!
Stand - https://www.printables.com/model/485478-parametric-stand-for-tablet-or-plaque-award
its always the 10mm best to print in titanium or stainless steel or some other exotic super material and pint like 50 of them
1:8th Scale International Harvester Rear Wheel Rims Four different files. No Wheel Weights Two Wheel Weights Four Wheel Weights Six Wheel Weights
1:8th Scale John Deere Heavy Cast Rear Wheel Rims
The smallsword is the concealed carry weapon of the Victorian era. It had a short, triangular blade that was used only for thrusting. Originating in France, it spread quickly across Europe and became both the standard gentleman's carry,…
Ipads This listing will include all the keyguards I have designed for Pro 12.9. If you are looking for iPad mini, Air, Pro, regular iPads please look at my profile for other listings. Most of these have been designed for specific people…
John Deere 3020 NFE (Narrow Front End) - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A…
John Deere 4020 NFE (Narrow Front End) - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A…
I designed and printed these characters as a special gift for the Cub Scout pack ("Lobinhos") of the Grupo Escoteiro do Ar América 58/PR in Brazil. The Jungle Book characters are central to their program, so I wanted to create something…
Hello everyone! This is my remix of N8thin 's beautiful X-shot MPP Stock-ish Stock model. I loved the stylings and feel of their stock, but I wanted a version that was a little bit longer to fit me better. So, that's what I set out to…
Check valve with 5/8ths inch barbs. Works with 5/8ths inch ID garden hose. Uses 2 o-rings; 19mm OD x 2.5mm, and 29mm OD x 1.5mm (Amazon)
John Deere 48 Front Loader - 1:8th Scale Made to fit the 3020 and 4020 tractors I have modeled. Uses M2 and M4 Screws. Indents indicate where holes need to be drilled out. Would love to see pictures of your makes!
John Deere Rear Wheel Rims - 1:8th Scale Made to fit the Scale Models 1:8th scale tractor. Will also fit the 1:8th scale John Deere 4020 and 3020 models I have available. However, since the rims needed to accommodate the OEM tire, there…
Farmall H Steel Wheel Set - 1:8th Scale Made to fit the Scale Models 1:8th Farmall H.
The original Dishwasher Clean/Dirty Sign is great, but once printed and mounted on the door we found it WAY to large & intrusive. This remix is 1/8th the size, and with that, the knob has been made 100% longer for better grip. The mount…
![Starlink V3 [30mm] & [1 5/8ths (~41mm)] wall mount for fence](https://media.printables.com/media/prints/c2fdbff4-6dd9-4fa7-994d-9a250545e74b/images/10597901_b387d8c1-0931-4266-9be5-a1772ab21d4b_1b22638d-e4e4-4101-96cf-2f0f5c7435e5/screenshot-2025-09-03-at-100725-am.png)
