1 / 3
Eiki SSL / Bell & Howell 3500-series Focus Tire/Lens Focus Knob — image 1
1 / 3

Eiki SSL / Bell & Howell 3500-series Focus Tire/Lens Focus Knob

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement TPU tire for a common fail-point on the 16mm SSL-chassis, where the old rubber focus tire rots away.

Rating
0 / 5
Likes
1
Downloads
8
Makes
0
Views
50
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

Gone are the days of using masking tape and PTFE tubing for this repair!

I recently bought an untested Bell and Howell 3580 (made by Eiki, equivalent to the SSL-0), knowing it needed some repairs. As I got online to research the issues I was experiencing, I noticed the focus tire rotting away was an extremely common one. For years, it looks like the common method of repair was to build up the spindle with packing tape, and slide some aquarium tubing over it. While this method has obviously worked... I had some extra TPU laying around, and enough of the original tire to get approximate sizing.

Measured to press fit onto the focus shaft, the TPU will slightly deform and index onto the shaft's ribbed area. The tire fits perfectly back into the hole of the lens holder, and meshes with the lens threads quite nicely. Just for good measure, I tested this part while holding the lens holder assembly straight down and it still drives the lens just fine.

Material:

  • TPU 90A

Print Settings:

  • Layer Height: 0.12mm

  • Walls: 4

  • Infill: 100%

  • Seam: Random

V3 reduces ID slightly for a more snug fit around the metal insert to reduce slippage, as well as the OD so as not to protrude so far into the lens carrier. Adjustments made for upcoming custom lenses, but tested and working smoothly with an OEM lens.

Tags