Adaptér-Dávkovač pre náhradné náplne WC gélu
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Praktický dávkovač na WC gél, ktorý šetrí peniaze aj prírodu. Vyrobený z odolného ASA plastu pre dlhú životnosť.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 51
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Máte doma prázdny originálny dávkovač na WC gél a nechcete kupovať stále nový plastový aplikátor? Tento 3D tlačený model slúži ako opakovane použiteľný adaptér/dávkovač pre [Doplňte názov/značku gélu, napr. Duck Fresh Discs] náhradné náplne. Umožňuje presné a hygienické dávkovanie gélových diskov priamo do WC misy. Vďaka použitiu materiálu ASA je odolný voči vlhkosti a čistiacim prostriedkom.
Nastavenia Tlače a Odporúčania:
Materiál: ASA (odporúčané pre odolnosť a hygienu). PLA/PETG nemusia v agresívnom prostredí WC misy dlho vydržať.
Podpery (Supports): Áno, vyžaduje podpery.
Tip pre orientáciu: Odporúčam tlačiť hlavné telo dávkovača postavené na širšom konci (zvon). Podpery budú potrebné len pre vnútorné zarážky a drážky.
Výplň (Infill): 15 % - 20 % (mriežka alebo gyroid).
Vrstva (Layer Height): 0.2 mm alebo 0.16 mm pre hladšie detaily.
Počet obvodov (Perimeters): 3 (pre zvýšenie pevnosti a vodotesnosti).
Návod na použitie:
Do vytlačeného adaptéra vložte náhradnú gélovú náplň.
Priložte adaptér k vnútornej stene WC misy.
Pomaly stlačte piest, kým gélový disk nepriľne k porcelánu.
Adaptér po použití opláchnite.
🇬🇧 Verzia: Popis modelu (English)
Model Title: Toilet Gel Refill Dispenser / Adapter
Description: Have an empty original toilet gel dispenser and tired of buying new plastic applicators every time? This 3D printed model serves as a reusable adapter/dispenser for [Insert Gel Brand Name, e.g., Duck Fresh Discs] refill packs. It allows for precise and hygienic dispensing of the gel discs directly into the toilet bowl. Made from ASA material, it is resistant to moisture and cleaning agents.
Print Settings and Recommendations:
Material: ASA (highly recommended for chemical resistance and hygiene). PLA/PETG may not hold up as long in the aggressive toilet environment.
Supports: Yes, supports required.
Orientation Tip: I recommend printing the main body standing on its wide end (the bell). Supports will only be needed for internal stops and slots.
Infill: 15% - 20% (grid or gyroid).
Layer Height: 0.2mm or 0.16mm for smoother details.
Perimeters: 3 (for increased strength and water resistance).
Instructions for Use:
Insert the gel refill pack into the printed adapter.
Place the adapter against the inner wall of the toilet bowl.
Slowly push the plunger until the gel disc adheres to the porcelain.
Rinse the adapter after use.