5mm Spacer for Noctua NF-A9x14 Fan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
5mm spacer for the Noctua NF-A9x14, useful for rear exhaust clearance and noise tuning.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 92
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You can support my works here: buymeacoffee.com
This is a simple 5 mm spacer for the Noctua NF-A9x14 slim 92 mm fan.
I designed it for use as a rear exhaust spacer in my NCASE M2 Grater build. The spacer can help with clearance, reduce fan obstruction against a panel or grille, and may slightly improve noise character by moving the fan away from nearby surfaces.
It should work with the Noctua NF-A9x14 although fitment may vary depending on screw length, fan frame design, and case mounting points.
Recommended use:
- Noctua NF-A9x14 rear exhaust
- 92 mm fan spacing
- SFF PC case modding
- Reducing grille turbulence
- Improving fan clearance
Print recommendation:
PETG, ASA, ABS, or similar heat-resistant filament is recommended. PLA is acceptable for testing, but I would avoid it for long-term use inside a warm PC case.