RAD-Moon 2 End Bumpers (TPU)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TPU end-caps for the Intrepid RAD-Moon 2. Shock absorption, slip-resistant feet, cable and LED cutouts.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
TPU end-cap bumpers for the Intrepid Control Systems RAD-Moon 2. The RAD-Moon 2 is a 100/1000BASE-T1 Automotive Ethernet to standard Ethernet active media converter, used by anyone working on in-vehicle Ethernet, infotainment buses, or doing automotive security research. I created this model because I bought a RAD-Moon 2 off the secondary market and it didn't come with the stock bumpers. Plus, I didn't like how they looked, anyway.
What they do
Cap the ends of the unit with a soft TPU sleeve that absorbs drops and bench bumps.
Add slip-resistant feet that elevate the unit a few millimeters off the surface.
Include openings for the connectors on the ends.
Print settings
Filament: TPU. Designed with Polymaker PolyFlex TPU90.
Layer height: 0.20 mm
Nozzle: 0.4 mm at 225 C
Walls: 3 loops
Top and bottom shells: 5 and 3 layers
Infill: 15 percent crosshatch
Supports: none
Installation
Slide the bumper onto the end of the RAD-Moon 2. It's a tight fit until they reach the end and the device locks in place. There is a top and bottom. It's left as an exercise to the reader to figure out which is which.
Compatibility
Designed against the standard RAD-Moon 2 (Intrepid part RAD-MOON2, with the Marvell 88Q2112 PHY, TE MATEnet T1 connector, and ix Industrial lab-side connector per IEC 61076-3-124). The H-MTD variant (RAD-MOON2-2220M) has a different vehicle-side connector. The bumper should work with the other variants. I didn't block much of the end faces.
Disclaimer
I am not affiliated with Intrepid Control Systems. This is a personal accessory I made for my own unit and am sharing as-is. The RAD-Moon 2 is a product of Intrepid CS and the trademarks belong to them. Print and use at your own discretion.