Prius V Card Slot Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replace the cardholder in your Prius V with a cover, or a phone mount
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v3.0
Wondering what to do with your card slot in your Prius V?
Use this replacement to cover it up, or mount your own thing with an M3 Screw!
Print orientation
For the best looks, print in the default orientation already in the model. The tabs holding the cover in place are thick enough to not snap off easily.
Print settings
Material: ABS - ABS or any high temp resistant plastic to avoid melted plastic in a hot car situation.
Shells/perimeters: At least 3 shells/layers including top/bottom
Infill: 15% with gyroid was fine, but might be fine with less?
Installation:
First, I recommend taking a look at this youtube video that shows how to open up the dash of a Prius V
https://www.youtube.com/watch?v=9PzxRZ2j2iM up to around the 4 minute mark
Then take a screwdriver to pop out tabs and pull the black card slot out. Afterward, the 3D print should be able to slid in and pop into place.