Food Mill / Passaverdura Knob for 7 mm Keyed Shaft
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A practical replacement knob for a food mill handle, designed to rotate smoothly while in use.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 13
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
This is a replacement rotating knob for a traditional food mill, also known in Italian as a “passaverdura”.
I designed this part to repair a food mill with a broken or missing handle knob. It is a simple functional replacement part, but it can make an old kitchen tool usable again instead of throwing it away.
The knob has a central 7 mm shaped socket with small retaining / driving tabs, designed to fit the metal shaft of the handle. The socket is not a simple round hole, so please check the shape and dimensions of your original handle before printing.
The outer shape is rounded and comfortable to hold while turning the food mill. The model was designed around my own food mill, so it may not be universal, but it can be useful for similar models with the same type of shaft.
Recommended use:
- Replacement knob for a food mill / passaverdura
- Repair of a broken or missing handle grip
- Functional print for kitchen tools
- Suitable for a 7 mm shaped handle shaft with retaining tabs
Suggested print settings:
- Material: PETG recommended, PLA or PLA+ should also work
- Layer height: 0.20 mm
- Infill: 30–50%
- Perimeters: 3 or more
- Supports: usually not needed, depending on the selected orientation
- Print orientation: place the flat side on the print bed
For better durability, I suggest using PETG, especially if the part may be exposed to water, cleaning, or repeated use. PLA can work, but avoid high temperatures and do not wash it in a dishwasher.
After printing, test the fit on the handle shaft. If the socket is too tight, lightly clean the edges with a small file or carefully enlarge the contact points. The knob should fit firmly without excessive play.
This is not a universal spare part. Please verify the shaft diameter, the retaining tabs and the general dimensions before printing.