5 kg Spool Holder and Adjustable Support for ELEGOO Centauri Carbon
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spool Holder and Adjustable Support for 5 kg Filament Spools
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 54
- Makes
- 0
- Views
- 269
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
5 kg Spool Holder with Adjustable Support
I made this remix of creations by Uncle Jessy, rbliss, and Firstlayer Oy, to fit my newly bought 5 kg spool of SUNLU filament. Based on the update in the description of rbliss' spool holder support, I decided to make the support height adjustable using Firstlayer Oy's, adjustable feet. This spool holder and support, therefore, should fit Centauri Carbons with or without anti-vibration feet, and printers on uneven surfaces.
Dimensions:
The spool holder will fit spools with a width up to 170 mm (~6.7 inches). The adjustable support can be adjusted from a height of 165 mm to 195 mm.
Print:
Printed on the ELEGOO Centauri Carbon 1 with a 0.4 mm nozzle, in PLA @ 240°C.
The spool holder was printed in PLA, linewidth of 0.6 mm, 2 perimeters, layer height of 0.3 mm. Remember to remove the built-in supports. The spool holder has two groves for PTFE tubes, a nice addition but not necessary.
The spool holder support top and bottom were printed together by object. Printed in PLA linewidth of 0.6 mm, with 3 perimeters, and using a layer height modifier. The threaded parts of the support were printed with a 0.12 mm layer height following the recommendations of Firstlayer Oy, other layers were printed at a height of 0.3 mm.
Total print time 1h38m, ~100 g of filament used.