Flydigi Vader 3 / 4 Pro - Replacement LB/RB Bumper (Shoulder Buttons)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement LB/RB bumper module (shoulder buttons) designed for Flydigi Vader 3 Pro and Vader 4 Pro controller
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 127
- Makes
- 0
- Views
- 404
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
Technical Details & Printing Recommendations:
Material: I highly recommend using PETG or ABS/ASA for this part. Given that these buttons are subject to constant clicking and physical stress, PLA might be too brittle and prone to snapping.
Printing Orientation (CRITICAL): Please print the part on its side, exactly as configured in the provided .3mf file. This orientation ensures that the stress is distributed along the layers, preventing the buttons from snapping off during use.
Layer Height: 0.12mm to 0.16mm (for better precision on the thin retaining tabs).
Print Speed: Use slow print speeds (specifically for external perimeters and small features). High speeds can cause vibrations that will ruin the precision of the small tabs and hinge points.
Supports: The model requires carefully placed supports, especially around the hinge areas. Take your time during post-processing to avoid damaging the delicate geometry.
Update [Version 2]: I have uploaded an improved version of the bumper with optimized geometry for smoother corners and better printing results. This V2 model is more robust and easier to print while maintaining the original tactile feel. I highly recommend using this version for your repairs.