Dagger Of Time from Prince Of Persia The Two Thrones
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fan art of the Dagger Of Time from the videogame Prince Of Persia The Two Thrones
- Rating
- 0 / 5
- Likes
- 4
- Makes
- 0
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Commercial Use
MODEL
This model is a fan art modeled entirely from scratch using official artworks, concept arts and in-game screenshots as reference, with details and some modifications added for ease of print and use.
The dagger model comes whole and split in pieces for ease of print. The pieces are all printable on a bed larger than 20 cm, and the whole dagger will be about 50 cm long once completely assembled.
Detailed instructions are provided in a pdf file with pictures and procedures on how to assemble the printed parts.
Artstation: https://www.artstation.com/artwork/L4DRX0
Timelapse of the modeling:
PREMISE
This model is fairly easy to print and assemble with some caution and the right screws, but the electronic part and cable fitting may take many hours of work to complete.
PRINTING ORIENTATION
You can print the pieces oriented as they come, using supports where needed.
For Blade A and Blade B, print them perpendicular to their split cut (as they come), with no supports.
You can print the Sand Tank in vase mode for a better surface.
HARDWARE - SCREWS
- M4x80mm (Blade A to Blade B)
- M4x60mm (Blade A to Blade C to Handle)
- M4x20mm (Handle to Blade A)
- 4x M4x10mm (Bracers to Blade A)
- 2x M4x25mm (Guard Bottom to Blade A to Guard Top)
- M4x25mm (Sand Tank Plug to Sand Tank Internal LED Bracket)
- Optional M4x7mm (Blade A to Sand Tank)
HARDWARE - LEDs
- 3X170mm 5V COB LED Yellow (Sand Tank Internal)
- 3X120mm 5V COB LED Yellow (Sand Tank)
- 3X240mm 5V COB LED Blue (Health Bar)
- 3X70mm 5V COB LED Yellow (Wheel)
- Mini blade switch 8.5x3.5mm Two positions
- About 400mm Black cable
- About 300mm Red cable
- 2x CR2032 button batteries
- CR2032 flat battery holder, 24x45mm. If longer, you can cut it until it fits
- Some thin heat shrink tubing