Panda Breath for Prusa Core One
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replaces the left C1 side cover to make space for the Panda Breath Heater.
- Rating
- 4.667 / 5
- Likes
- 23
- Downloads
- 31
- Makes
- 3
- Views
- 771
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Printable description
This mod is for the Prusa CORE One and replaces the left side wall to create enough internal space for the Panda Breath heater.
The replacement wall includes two holes for typical M3 Voron-style heat-set inserts, which are used to mount the Panda Breath securely.
Included parts:
Replacement left wall — print 1x
Bottom feet for the Panda Breath — print 2x
Cable cover for the Panda Breath power cable — print 1x
Wall mount to secure the Panda - print 1x
The original rivets/clips from the stock wall can be reused.
The wall has two holes for M3 Voron-style heat-set inserts. One is used for the Panda Breath and the other for the wall mount to hold the Panda Breath in place.
Print settings
Material: ABS
Supports: No
Perimeters: 4
Infill: 40%
A pre-cut 3MF file for the wall is also included and ready to print (created with OrcaSlicer!)
If you want to use the Panda Breath in Auto Binding Mode, check this GitHub repository:
https://github.com/Argolein/Panda-Breath-Prusa-Integration
It lets the Panda Breath read the Prusa CORE One bed temperature through PrusaLink by exposing a small Moonraker-style bridge. The Panda Breath connects to the Pi instead of directly to the printer.
Hardware note
The wall uses standard M3 Voron-style heat-set inserts.