1 / 7
Portable monitor VESA 75 mount with handle and pen holder — image 1
1 / 7

Portable monitor VESA 75 mount with handle and pen holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Base for mounting portable monitors with a two-hole VESA 75 mount + handle and pen holder

Rating
0 / 5
Likes
0
Downloads
3
Makes
0
Views
105
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Noncommercial

VESA 75 Quick-Mount Adapter with handle and pen holder for Leitz Ergo & ThinkVision M14 / M14t

Why I Designed This

Even though I work with a 34" ultrawide monitor, there are still situations where an additional is useful. Instead of adding a second large display, I decided to use a portable monitor

For my workflow, this provides all the extra screen space I need while offering several advantages: no additional power cable, touchscreen functionality, and stylus support in a compact and flexible setup

However, mounting the monitor directly to the existing VESA 75 arm showed a problem - while it was technically possible, the mounting surface would have been quite small, or the VESA plate would have been visible below the display - So I started to solve that issue

Features

  • Large contact surface for improved stability

  • Integrated handle for convenient monitor arm positioning

  • Dedicated stylus holder

  • Quick and easy monitor removal for portable use

The design is intended for a ThinkVision M14 / M14t used with a Leitz Ergo monitor arm. However, the mounting pattern is compatible with any two-hole VESA 75 mount that follows the same spacing

Items needed:

  • 2 × M4 × 12 mm screws (or M4 × 14 mm with washers)

  • 4 × M5 × 8 mm screws

  • 1 × M5 × 35 mm (or longer, depending on the selected handle)

  • Optional: 1 × M6 × 10 mm screw with washer (for attaching the monitor arm assembly)

Assembly:

  1. Attach the monitor arm base plate between the front and rear parts of the model using the lower V100 and V75 mounting holes

    • Secure with 4 × M5 × 8 mm screws

  2. Install the handle

    • Depending on the handle version you choose, an appropriate M5 screw will be required.

    • For the printed handle version, I used a 40 mm grub screw (set screw)

  3. Reattach the complete assembly to the monitor arm.

  4. Mount the monitor using:

    • 2 × M4 × 12 mm screws, or

    • 2 × M4 × 14 mm screws with washers

For portability, I recommend using thumb screws or another tool-free fastening method - this allows the monitor to be removed quickly whenever you want to use it as a portable display

Notes

The adapter can also be used without the handle and/or the rear plate. For this configuration, see the "NoBore" variant

Tags