Portable monitor VESA 75 mount with handle and pen holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Base for mounting portable monitors with a two-hole VESA 75 mount + handle and pen holder
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
VESA 75 Quick-Mount Adapter with handle and pen holder for Leitz Ergo & ThinkVision M14 / M14t
Why I Designed This
Even though I work with a 34" ultrawide monitor, there are still situations where an additional is useful. Instead of adding a second large display, I decided to use a portable monitor
For my workflow, this provides all the extra screen space I need while offering several advantages: no additional power cable, touchscreen functionality, and stylus support in a compact and flexible setup
However, mounting the monitor directly to the existing VESA 75 arm showed a problem - while it was technically possible, the mounting surface would have been quite small, or the VESA plate would have been visible below the display - So I started to solve that issue
Features
Large contact surface for improved stability
Integrated handle for convenient monitor arm positioning
Dedicated stylus holder
Quick and easy monitor removal for portable use
The design is intended for a ThinkVision M14 / M14t used with a Leitz Ergo monitor arm. However, the mounting pattern is compatible with any two-hole VESA 75 mount that follows the same spacing
Items needed:
2 × M4 × 12 mm screws (or M4 × 14 mm with washers)
4 × M5 × 8 mm screws
1 × M5 × 35 mm (or longer, depending on the selected handle)
Optional: 1 × M6 × 10 mm screw with washer (for attaching the monitor arm assembly)
Assembly:
Attach the monitor arm base plate between the front and rear parts of the model using the lower V100 and V75 mounting holes
Secure with 4 × M5 × 8 mm screws
Install the handle
Depending on the handle version you choose, an appropriate M5 screw will be required.
For the printed handle version, I used a 40 mm grub screw (set screw)
Reattach the complete assembly to the monitor arm.
Mount the monitor using:
2 × M4 × 12 mm screws, or
2 × M4 × 14 mm screws with washers
For portability, I recommend using thumb screws or another tool-free fastening method - this allows the monitor to be removed quickly whenever you want to use it as a portable display
Notes
The adapter can also be used without the handle and/or the rear plate. For this configuration, see the "NoBore" variant