1 / 6
AUSOM L2 electric scooter - Front Fender Cap with Screw — image 1
1 / 6

AUSOM L2 electric scooter - Front Fender Cap with Screw

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Cap that can replace front headlight for Ausom L2 (probably some others models too), with 3D-printed locking screw

Rating
0 / 5
Likes
0
Downloads
3
Makes
0
Views
101
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

I don't know who designed the stock headlight to be just 20cm above the ground, but unsurprisingly, it's better at blinding people than actually lighting the way ahead. Because of this, I designed a separate mount that clamps onto the steering column, which is where the stock front light has been relocated. With the light moved up, I needed a clean way to plug the remaining hole in the front fender.

This cap fits my Ausom L2 electric scooter perfectly (and some other Ausom models sharing the same front fender). No additional hardware required.

I printed mine in PLA+ — which is probably suboptimal for outdoor use, but that's what I had on hand in matching colors. Ideally, you should probably print this in PETG or ASA for proper UV and weather resistance.

My Print Settings:

  • Adaptive Layer Height: Highly recommended for the threaded section to ensure smooth engagement. The rest of the cap height isn't as critical since it's hidden inside the housing anyway.

  • Wall Loops: I used 4 walls for the embedded nut section and screw (applied via object-based settings in the slicer) to ensure maximum thread strength, but it is probably overkill. For the main body of the cap, 2 walls are plenty.

  • Supports: None needed.

  • Multi-Color Text (No AMS): I don't have an AMS system, so I inserted a manual filament change (M600 command) right at the layer where the "Ausom" logo begins to make the letters pop out.

Tags