TPU Magnetic Base Foot Mount. 28mm Diameter. Uses 6x3 magnets and M5 hardware.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small magnetic base that uses 6x3 magnets. Designed to be printed in TPU.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 8
- Makes
- 0
- Views
- 60
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- GNU General Public License v3.0
MADE IN TINKERCAD, SO NO CAD FILE TO SHARE. These are designed to be printed in 95A. The part needs to stretch a bit for the magnets to fit, so rigid filaments will not work. The magnets are .5mm off the bottom, so I print with a .2mm layer height with a .3mm first layer. I did 4 walls and 20% infill.
Press fit 6mmx3mm magnets, then bottom them out with a properly sized dowel or hex bit. The lip at the top should close back in around them. The larger commercially made magnetic bases I have alternate the polarity of the magnets, so that is what I did. (Magnets across from each other are same polarity. Magnets next to each other are opposite polarity.) If you need more holding power, you can use N52 instead of N32 magnets, although they are much more expensive. I've also included double stacked magnet versions.
Options:
Mag_Base_Nut: Holds an M5 nut so the foot can be attached with an M5 screw from above.
Mag_Base_Washer: Holds an M5 washer so the foot can be attached from underneath with an M5 button head screw.
Mag_Base_15mm_Ball: works with some ball mounting systems. EDIT: Added 17mm Ball mounts
Mag_Base_Pivot_Base + Buttonhead Adapter or Threaded Ball: Pivoting foot so projects with multiple feet can stick to curved surfaces like a car. (Probably not strong enough to use while driving.) An M5 screw can be threaded through the bottom of the "buttonhead adapter" which will put the head of the screw inside the base with the threads sticking up (see pic). The screw can still be turned through a hole in the bottom of the base. This would be my preferred method. Alternatively, the ball end can be installed on the end of the screw. Which method to use is up to you and depends on how you plan to mount them. After the ball is installed on the screw, it is pressed into the base. It requires a lot of force, but will pop in.