1 / 5
Radiomaster TX16S MK3 - Right/Left slider lever redesign — image 1
1 / 5

Radiomaster TX16S MK3 - Right/Left slider lever redesign

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Redesign (longer and angled) of the levers of the right and left sliders (RS & LS) of the Radiomaster TX16S MK3 radio

Rating
0 / 5
Likes
4
Downloads
41
Makes
1
Views
264
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Although the RM TX16S Mk3 is a decent enough radio, the right and left slider levers are horrible. I use these as throttle for a F5J glider (and other gliders) and in case of quick response (during approach or low altitude) my finger can't find the levers or they slide of. Particularly the fillet at the end is not nice.

I modelled an angled lever (that I use now) and a strait lever. Choose which suits you best.

I printed these from PETG with a 0.4mm nozzle and 0.2mm layerheight. When removing the "switch corners" of the radio, all you need to to is remove the two black philipshead screws, remove the printwith the pot and remove the plastic piece from the pot.
The replacement part is a drop in (at least it is for me with my print settings).

In case you have trouble replacing the little printboard, remove or loosen the aluminium nuts on top of the 2 switches to give some room.

Reassemble and of you go!

Digital Solidmodel (STEP) files are available upon request for a small (€1,- or €2,-) Paypall donation (DM me if required)

Tags