1 / 4
WORX Battery Holder for IKEA SKÅDIS (3 x Capacity) — image 1
1 / 4

WORX Battery Holder for IKEA SKÅDIS (3 x Capacity)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Zero-wobble 3x mount for all Worx 20V batteries. Fits Ikea Skådis or walls securely using custom locking pins.

Rating
0 / 5
Likes
5
Downloads
33
Makes
0
Views
94
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

Optimize your workspace with a mount designed for maximum stability and convenience. This organizer holds up to 3 batteries and is compatible with the entire Worx 20V PowerShare ecosystem (any amperage and size).

The real strength of this design is that it permanently solves the instability problem typical of pegboard accessories: no more tilting or annoying vertical movement when inserting or removing batteries.

The "Zero Wobble" Interlocking System Stability is guaranteed by two bottom locking pins (included in the files).

  • Installation: These pins must be printed and inserted into the specific holes on the main frame. The fit is designed with tight tolerances for a perfect lock: apply firm pressure to snap them into place.

  • Maintenance (Pro-Tip): Once inserted, removal is intentionally difficult to ensure maximum hold over time. If for any reason you need to remove the mount from the pegboard, do not force the main frame. I recommend breaking the back tabs of the pins with pliers; you can reprint these sacrificial pins in minutes at zero cost, keeping the main body completely intact.

Mounting Options

1. For Ikea Skådis pegboards: The main mounting utilizes the rock-solid T-Clip system. The integrated slot in my model is based on the excellent design by LineArcLine (Skadis T-Clip System). The mini clips included in the files are a remix by capze (Skadis T-Clip Mini Parametric). Note: The provided clips are calibrated for the tolerances of painted Skådis boards. For unfinished wooden boards, please download the dedicated profile from capze's original model.

2. For Wall Mounting (Wood/Metal/Concrete): Want to mount it directly on the wall or workbench? No problem. By inserting the plastic conversion washers (included) into the T-Clip slots, you can securely fasten the structure using standard #6 or #8 wood screws. For concrete or drywall mounting, pair the washers with common ¼" wall anchors.

Recommended Print Settings Designed to be printed flat on its back.

  • Infill: 15% (More than enough to ensure the required structural rigidity).

  • Material: PLA, PETG, or ABS/ASA. (PETG is not necessary; the entire model, including the clips and locking pins, has been successfully tested and works perfectly in standard PLA).

Tags