1 / 2
Antenna Mast Guy Ring - 5 hole / asymmetric
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mast guy ring, sized for 34.5mm mast or flagpole.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 59
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here's an asymmetric guyline ring for a mast or flagpole with a 34.5 od. I made this because I needed to do a specific tie-off that required an odd angle.
It's beefy enough at 1 cm thick and the guy holes are 6mm. All the edges are rounded off to minimize fraying.
I included a spacer in case you need to stand it off from the stage locks on a telescoping pole.
Printing
I used ASA because outside and tensile strength, but a fiber composite would work great too.
100% infill... it's not that heavy and it won't fail easily.