Vacuum Robot Ramp (Parametric)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric door threshold ramp for robot vacuums. Snap-fit pieces, fully customizable in Fusion 360.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 91
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Parametric Robot Vacuum Ramp
This is a parametric door threshold ramp for robot vacuums. Open the Fusion 360 file and adjust the parameters to fit your door and printer.
Parameters
Parameter | What it does |
|---|---|
| How high the ramp needs to be (your threshold height) |
| How long the ramp is front to back (controls the angle) |
| The total width of the assembled ramp |
| The max length your printer can print in one go |
| Length of the snap connectors between pieces |
The Four Bodies
The file always generates four bodies. You won't always need all of them.
Single Unit Use this when entire_ramp_width fits within max_print_length. One piece, done.
Left Unit + Right Unit Use these when you need exactly two pieces.
Left Unit + Filler Unit(s) + Right Unit Use these when you need three or more pieces. Print as many Filler Units as needed to fill the gap.
Example: 800mm width / 250mm printer = 4 pieces. So you need 2 Filler Units.
How to know how many pieces you need
Divide entire_ramp_width by max_print_length and round up. That's your piece count.
Print Left Unit + 2x Filler Unit + Right Unit.
Assembly
The pieces snap together. Just press them in from the top.