1984-1989 Porsche 911 vent connector clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement vent connector clip on p/n 911.572.041.00 and 911.572.041.01. Printed in TPU.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 28
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
The little clip that holds the vent vanes and allows you to move them broke after ~40 years. Unfortunately, this plastic clip is not sold and one would need to buy an entire new vent assembly.
Luckily we still had the remains of the original (see picture), so I was able to take some measurements and replicate the part. I printed it in TPU both for heat resistance, and because this clip is the only way that the vent vanes hold in place. There is no other source of friction for the vanes in the assembly, so I would not recommend using PETG or ABS.
Installation can be done completely from the front with a set of tweezers or small needle nose pliers. However, pulling the vent does make it a little easier.