Prusa i3 MK2/MK3 Spool Holder - 100% Printed with Herringbone Planetary Gear Bearings
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.11 – €0.14 net (excluding VAT)
For file: Prepared files for MK3S for PLA / 4xbushing-v1_02mm_pla_mk3s_9m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.12 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 9 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Fully-printable frame mounted spool holder. Uses printed herringbone gear bearings (no 608s). Optional stabilizer bar.
- Rating
- 4.9 / 5
- Likes
- 102
- Downloads
- 540
- Makes
- 11
- Views
- 3,175
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This model is a combination of two fantastic 3D models: Emmet's Herringbone Planetary Gear bearings and Martin Majewski's Spool Holder. The motivation behind this project was simply to remove the need for store bought 608 bearings. These printed ones are extremely smooth and more than sufficient for this use. They are also they are less likely than 608s to over-spin when the filament is pulled quickly. Plus they look cool and it's a great way to show what your 3D printer can do.
Features
- Fully 3D printed
- Herringbone gear bearings
- Holds any size spool
- No need for metal 608 skateboard bearings!
- Custom threaded nut and bolts
- Optional stabilizing bar
- Multiple arm lengths
- Multiple stabilizer bar widths
Printing Instructions
You will need to print:
- 4x Gear Bearings (in your chosen tolerance)
- 4x Nuts
- 4x Bolts (use .3mf file)
- 4x Bushings
- 1x Left Arm
- 1x Right Arm
- 1x Stabilizer Bar (optional)
Note: If you already have Martin's spool holder you can reuse the arms. The rest of the parts are not compatible.
Print Settings
- Resolution: 0.15-0.25mm
- Supports: None
- Material:
- PETG or PLA. Bearings work better in PETG.
- Infill:
- Arms: 25% honeycomb
- Bolts: 100% for the stem. 25-40% honeycomb pattern for base.
- Everything else: 15% is fine
- Perimeters: 2-3
To expose the honeycomb pattern on the arms and the bolts set the number of top and bottom layers to 0 and adjust the infill pattern.
Bearings x4
These are obviously the trickiest part to print. You should print a single bearing first to determine what tolerance and material works best for your printer. On my MK3S+ I found that 0.2mm was ideal. PETG seems to spin better than PLA.
- 0.1mm (tight)
- 0.2mm (mid, start here)
- 0.3mm (loose)
They only need to be tight enough to prevent the gears from falling out. Start with 0.2mm. If the gears are fused and won't turn then try a larger tolerance. The OpenSCAD file is attached so if you want to tweak it more you can do so there. Credit to amasraff for the original SCAD file with the groove added.
Right off the printer these probably won't spin smoothly. Play with them for a bit to loosen them up! Spin them and wiggle the gears around and pretty soon they should roll well.

TL;DR: Print 1x “gear-bearing-v1-regular-0.2mm-tolerance.stl”. If it spins well print 3 more.
Bolts x4
Use the attached 3mf file. It has a modifier to print the shaft at 100% infill while leaving the honeycomb pattern visible on the ends. Honeycomb infill should be no less than 25%.
Arms x2 (one left, one right)
I like the spools sitting a little lower on the rollers, so I've included an extended version of the arms. Your choice.
- Normal (same length as Martin's spool holder)
- Extended (25mm longer)
Bushings x4
If these are too snug you can scale them up a bit (try 105%).
Nuts x4
No notes, these are easy to print
Stabilizer Bar (Optional)
I found the source model too wobbly, so I created a simple bar to run through the arms. It helps keep the holder steady while changing spools. If you find it too loose/tight you can scale the model up/down a little bit. This part is not required and could probably use some improvement.
If you use very wide spools you might want to print the extra long version. The normal one is fine for all 1kg spools I have tested.