SuperBase Case – Meshtastic radio
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Build your own BASE system Meshtastic® radio. Standalone functionality in a super slim profile.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 56
- Makes
- 0
- Views
- 504
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Share Alike
License Notes
This work is licensed under a Creative Commons Attribution-ShareAlike (4.0 International License)
Copyright © 2026 MUZI WORKS
Commercial use is fully permitted under this license, meaning you are free to sell, monetize, or otherwise use this design for commercial purposes. However you must give credit, provide a link to the license, note if any changes were made and distribute your contributions under the same or a compatible license.
We would also love you see your contributions so please share them with us!
Components Required
[3x] M2.5 socket head screws 12mm length
Print suggestions
Has been tested to print well with PLA, PETG, ASA
Nozzle: 0.4mm
Layer Height: 0.12mm or 0.16mm
Orientation: Face down
Support: None
Assembly Tips
Soldering is required on the boards, alignment jig provided to print
Make sure to align the OLED to the OLED bracket before sticking it down, removal is not recommended
Screws require 2mm hex drive
Full assembly instructions (including video)
Take your time and enjoy the process!
Fits:
Battery up to 8mm x 34mm x 55mm
Your choice of SMA antenna
Dimensions:
47.8mm x 79.5mm x 19mm [1.88in x 3.13in x 0.75in]
Purchase a pre-built device or case only from our web store:
https://muzi.works
Meshtastic® is a registered trademark of Meshtastic LLC. Meshtastic software components are released under various licenses, see GitHub for details. No warranty is provided - use at your own risk.