1 / 2
PIP Clog Sleigh Bell + Hi-hats charms — image 1
1 / 2

PIP Clog Sleigh Bell + Hi-hats charms

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Are you gonna just... walk or are you gonna make some noise?

Rating
0 / 5
Likes
16
Downloads
19
Makes
0
Views
130
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I ve always loved diy instruments! these clogs sound soooooooo good!

Print and placement Instructions

  • Print with 0,4 nozzle, 0.2mm layer height, 4 perimeters

  • Use the specific files for PETG or PLA (the tolerances are adjusted differently for each material).

  • Using the provided .3mf files is highly recommended!

  • Bells Once printed, place the pin in the hole with help of pliers.

  • Snap the inside ball to break it. If the ball snaps before placing, be carefull not to lose it 

  • Hi-Hats. Let them cool and separate the two cymbals.Use a blade if needed (normally it should seaparate easily).  Push the Pin all the way down until it snaps. Use a blade if needed (normally it should seaparate easily) 

  • Note for Silk PLA: Because Silk PLA can behave differently and weld more easily, I have included the .3mf files with settings that successfully worked for me.

  • Printing with PETG is highly recommended. 

Have fun and keep the beat going!

Tags