End Cap for Creality Clog Poke Nozzle Cleaning Tool (Uses Original Tube)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple enclosed end cap for the Creality Clog Poke nozzle cleaning tool that reuses the original clear storage tube.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 1
- Views
- 44
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
This is a simple add-on enclosure for the Creality Clog Poke Nozzle Cleaning Tool.
The original tool leaves the rear end open where the clear storage tube attaches. This printable part adds an enclosed end, giving the tool a cleaner finished appearance while continuing to use the factory clear storage tube.
No modifications to the original tool are required.
Features
Uses the original Creality clear storage tube
Encloses the rear end of the tool
Clean, finished appearance
Lightweight design
Easy to print
No supports required
Assembly
Remove the original end piece if necessary.
Install the printed enclosed end cap.
Reuse the original clear storage tube.
Enjoy the upgraded look and protection.
Print Settings
Material: ABS (recommended)
Layer Height: 0.20 mm
Walls: 3
Infill: 20%
Supports: None
Brim: Optional
ABS was used for the model shown, but PETG or PLA should also work.
Print Instructions
Print the model upright with the closed end facing upward. No supports are required.