Rainin/Mettler Toledo Lab Box – Rim Adapter for Proper Lid Latching
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rim that replaces the original tray insert, letting the lid of the Rainin/Mettler Toledo box latch again
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
|
-------------------------------------------
About:
If you use (or have on hand) a Rainin/Mettler Toledo lab box, you've probably run into a common issue: once the original tray, used to hold pipette tips, is removed: a gap is left between the body of the box and the lid. This causes the lid to no longer latch properly, leaving the box unsecured and without that tight factory fit.
To fix this, I designed a replacement rim for that fits exactly where the original tray used to sit. When placed along the inner edge of the box, the lid closes perfectly again, as if the original accessory were still in place. I recommend applying a small amount of superglue during installation to make sure the piece stays firmly in place and doesn't shift when you open the box.
As a bonus, this design is a great base for remixes: it can easily be adapted to add internal dividers, helping organize and separate stored items according to each user's needs.
Print details:
Printed on a Creality K1C
Filament used: 11.42g
Print time: 25 minutes
Filament type: ASA (you can use ABS, PETG, PLA...)
Orientation: printed upside down (inverted)
Supports: enabled (required due to orientation), but super easy to remove
A small accessory, but one that solves a real problem and restores the box's original secure-closing function.
-------------------------------------------
|
-------------------------------------------