1 / 10
Roof Tent Lightbar (For 25mm tubes, F3D and STEP included) - Perfect for Quechua MH500 2P — image 1
1 / 10

Roof Tent Lightbar (For 25mm tubes, F3D and STEP included) - Perfect for Quechua MH500 2P

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Central mounted LED lightbar for better lighting inside of any rooftop tent with 25mm tubes

Rating
0 / 5
Likes
1
Downloads
4
Makes
0
Views
72
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Even if you're in nature, good lighting is always appreciated in dark scenarios (for humans and mosquitos).
What makes it even better, is not to worry about always carrying lights and lamps into your roof tent, because this lightbar is made to live inside your roof tent.
It works perfectly with the Quechua MH500 2P roof tent and can stay inside, even when closed during transport.

Model

The designs consists of two end caps and one or more clamps in the middle, depending on the width of your aluminum extrusion. In the middle of the clamps is space for a M3 threaded insert, the extrusion is securely attached with flat head or button head screws.
The clamps attach with a little bit of force onto 25mm aluminum rods. Don't worry, a little bit of force is needed.

The model is made for the structural poles of the Quechua MH500 2P roof tent. It uses 25mm diameter aluminum poles. Included are STEP and F3D Files, so that you can easily modify everything about the clamps through the sketches. Unfortunately it's not parametric (yet)™.

Filament

You can use any filament, that can withstand a bit of flexing and outdoor use. I recommend using ASA or Nylon.

Non-printed parts

- Generic COB LED strip with USB and controller if needed
https://www.amazon.de/dp/B0D9XHTC1K?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

- U-Shaped Aluminum Extrusion with diffusor (1000mm length)
https://www.amazon.de/Chesbung-Aluminum-Channels-Diffusers-Mounting/dp/B07PTQ6FTZ?crid=1J4V6YY0MYOO&sprefix=led%2Bdiff%2Caps%2C111&sr=8-7&th=1

- Ruthex RX-M3x5.7
https://www.amazon.de/ruthex-Gewindeeinsatz-St%C3%BCck-Gewindebuchsen-Kunststoffteile/dp/B08BCRZZS3?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=YT4SQ1C6ME9U&sprefix=ruthex%2Bm3%2Caps%2C117&sr=8-6&th=1

- M3x5 button head screw
https://www.amazon.de/Linsenkopfschrauben-Rundkopfschrauben-Flachkopfschrauben-Kohlenstoffstahl-Innensechskantschl%C3%BCssel/dp/B0FQJ4XNTY?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=14NL3PA1S6B29&sprefix=m3%2Blinsenkopfschrauben%2B5mm%2Caps%2C105&sr=8-6&th=1

Assembly

1. Print out two end caps and one or more middle clamps depending on the size of LED Strip and extrusion
2. Place the printed parts onto the aluminum extrusion and mark the drilling location with a pencil or centerpunch
3. Drill the holes in the aluminum extrusion with a 3,5 or 4mm drill
4. Melt in the threaded inserts
5. Place the printed parts onto the extrusion and screw everything together
6. Use the provided adhesive of the LED Strip to mount it onto the extrusion
7. Route the cable through one of the end caps
8. Clip the diffusor onto the extrusion
9. Mount everything inside the roof tent or any pole of your liking and power the strip with any USB Power Source
10. Enjoy bright lights in the most remote place you can imagine

Anything else

Feel free to remix the model and share any suggestions for improvement.

Enjoy!

Tags