Bontech LGX to E3D V6 adapter Version 2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This modified LGX mounting plate gives you the option to mount a groove-style heatsink to the Bondtech LGX extruder.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 121
- Makes
- 1
- Views
- 1,018
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
parts list
1 X lgx v6 adapter Mount v2
1 X lgx v6 adapter Clamp v2
2 X m3 screw
2 X m3 nut
1 X PTFE tube
Additional notes
parts are pre-oriented and should not need supports
parts use "false floors" to ensure holes are consistent when printing. they may need to be pushed or drilled out after printing. The suggested layer height is 0.2mm to ensure these features are printed correctly.
assembly
push the m3 screws through the mounting bracket holes from the top. put the m3 nuts onto the bolts and line them up with the hexagon holes on the underside of the clamp. while holding the nuts, turn the screws so they set the nuts in place. remove the screws. you are now ready to clamp the V6 hot end to the mount. insert a PTFE tube into the top of the clamp and cut flush with the top of the clamp. install the mount onto the LGX extruder.