1 / 3
Umarex Notos (OEM) Rear Stock Wall Mount / Holder — image 1
1 / 3

Umarex Notos (OEM) Rear Stock Wall Mount / Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Ambi wall mount; custom-sized for the Umarex Notos OEM rear stock profile, buffer tube style.

Rating
0 / 5
Likes
2
Downloads
12
Makes
0
Views
65
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

I needed a buffer tube style wall (closet door) mount for my Umarex Notos, but standard AR mounts don't work smoothly because the Notos OEM stock has a ridge that gets in the way/isn't perfectly round.

This is inspired by Joulez's AR wall mount (https://www.printables.com/model/1151840-ar-buffer-tube-wall-mount), but designed specifically for the Notos. I widened the opening to accommodate the stock ridge and tried to use a bit less plastic/speed up prints. It ended up being a good enough fit on the first print though. 

It mounts using two #10 wood screws (5mm holes, could probably get away with #8/9 if there's enough bite) and keeps the rifle parallel to the wall or door. The rifle doesn't hang perfectly straight, but the design strikes a nice balance between holding the gun securely and being easy to lift in and out, and gives enough room for a scope (UTG bugbuster in my case).

My print settings, increase the infill and or perimeters if you're feeling insecure:

  • Polymaker clear PETG

  • 4 perimeters

  • 20% gyroid infill

My uncalibrated hand tells me it could hold quite a bit more than the notos weighs, but I'll update if it fails with these settings. 

Hope this helps someone else get their rifle up off the box on the floor. 

Tags