Arachnid hero iron-on
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This template is designed to be ironed onto your T-shirts
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 53
- Makes
- 0
- Views
- 164
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Public Domain
It’s super easy to apply. Just follow these steps:
Print: Use the template I’ve already prepared. I set the thickness to 0.32 mm because that’s the ideal thickness: it holds up well but stays flexible.
Position: Place the piece flat on your T-shirt (I recommend using 100% cotton or a cotton blend).
Protect: Cover the entire design with wax paper (baking paper).
Iron: Set the iron to high heat with no steam. Apply firm pressure over the transfer for about 10 to 15 seconds.
Check: Let it cool for a moment and make sure the edges are firmly adhered. If any parts aren’t stuck down, carefully go over them again.
Extra tip: To make sure it stays really secure, turn the T-shirt inside out and iron the inside (always protecting the printed area with the paper).
To make it last longer (Washing and Care):
Washing: Wash at a maximum of 30°C to prevent the print from fading over time.
Dryer: Avoid it at all costs the extra heat will cause the plastic to peel away from the fabric.
Materials: The file is printed in PLA and prints perfectly, but if you want it to be super flexible with a rubbery texture and highly efficient, use TPU.
About this design:
-The profile is optimized to adhere well without leaving a thick patch.
-The surface comes out super smooth because I enabled the “ironing” (smoothing) feature.
-It prints in a couple of minutes and uses very little filament.
.3mf Specifications:
-Layer height: 0.16 mm
-Total thickness: 0.32 mm
-Print bed: Tested on textured PEI
If you print this, it would really help me if you could upload photos of yourself wearing it so I can see how it turned out and continue making more models. THANK YOU SO MUCH FOR YOUR SUPPORT!