Trunk Roller Blind Pull Handle for Dacia
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple handle that makes opening and closing the Dacia cargo cover easier.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 8
- Makes
- 0
- Views
- 88
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This accessory adds a comfortable grip while preserving the clean factory look of the cargo cover. The handle consists of two printed parts that lock together and are permanently joined using a simple plastic welding technique with a soldering iron.
Unlike glued assemblies, this design requires no adhesive. The welded joint is strong, durable, and almost invisible once assembled.
The model is optimized for PETG printing, requires no supports, and can be printed quickly with low material consumption.
Features
Comfortable grip for opening and closing the cargo cover
Factory-like appearance
Two-piece design
Plastic-welded assembly (no glue required)
Strong and durable connection
Easy to print
No supports required
Optimized for PETG
Assembly
Cut off the original fabric pull tab attached to the cargo cover.
Slide both printed parts together.
A groove will form on the underside.
Lightly melt the groove with a soldering iron to create a strong, nearly invisible plastic weld.
Allow the plastic to cool for a few seconds.
The handle is ready for use.
No glue or additional fasteners are required.
Printing
Recommended material: PETG
PETG is recommended because it offers excellent heat resistance for automotive interiors and creates a durable welded joint.
Recommended settings
Layer height: 0.20 mm
Infill: 20%
Supports: No
Brim: Not required