Mushroom cultivation box filter-Ø75
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mushroom cultivation box filter-Ø75. No glue needed, no support.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 7
- Makes
- 0
- Views
- 102
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Title:
Replaceable Ø75 mm Filter Holder for Plastic Grow Tent
Description:
A three-part threaded frame for mounting a round filter with a diameter of 75 mm and a thickness of approximately 2 mm into the transparent plastic film of a grow tent.
The inner and outer parts clamp the film between wide flanges, distributing the load and preventing the hole from tearing further. A replaceable filter cassette screws in from the outside, so the filter can be changed without removing the mount from the film.
Model parts:
1– inner clamping frame2– outer threaded nut3– screw-in holder for the replacement filter
The model is designed to print without supports. PETG is recommended, but you can use PLA. For cleaner threads, use a 0.20 mm layer height and at least 2-3 perimeters and 10% infill by gyroid.
Installation: cut a circular hole in the tent film, insert the inner frame from inside, screw on the outer nut from outside, then place the filter in the cassette and screw it into the holder.
!!! Real photos transformed using AI.
You can buy the filter on temu 75mm/2,95inch- 24pcs for about 3 dollars
