1 / 4
Arachnid cookie cutter — image 1
1 / 4

Arachnid cookie cutter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Enjoy your spider-themed cookies with this cookie cutter!

Rating
0 / 5
Likes
3
Downloads
8
Makes
0
Views
37
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Public Domain

Spider-Man Cookie Cutter and Stempel

This model is designed as a single piece that cuts out the outline while simultaneously stamping the details of the mask and the web. It works well with cookie dough, fondant, or modeling clay.

Recommended Print Settings

To ensure the mold is sturdy and the cutting edge doesn’t break when pressure is applied, I recommend using these settings:

Layer height: 0.16 mm. This helps capture small details clearly.

Wall loops: 4 or 5. The cutting edge is thin and needs to be printed nearly solid.

Fill: 15% to 20% using the Gyroid pattern.

Wall generator: Arachne. This is key to ensuring the fine lines of the spiderweb pattern remain continuous and free of gaps.

Ironing: Enabled only on the top layer. This leaves the stamp smooth and makes it easier to peel off the dough.

Material: PLA or PETG.

Usage and Cleaning Tips

Roll out the dough to a thickness of about 7 to 9 mm.

Dust the mold with flour before each cut to prevent the dough from getting stuck in the spiderweb pattern.

A good tip if the dough is very sticky is to place plastic wrap over it before pressing. The design transfers perfectly, and the cutter stays clean.

Wash it by hand with warm water and soap. Do not use very hot water or put it in the dishwasher, or the plastic will warp.

Tags