MK3.5S to MK4S with Nextruder from INDX upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Used Nextruder from INDX upgraded Core One + to bring MK3.5S to MK4S
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 12
- Makes
- 0
- Views
- 377
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
All of the models needed to upgrade mk3.5s to mk4s in one place. I am upgrading my mk3.5s to its final form. It started as a mk3 and it received every upgrade since then. It is a great machine paired with Prusa enclosure but it needs an upgrade.
Here you will find a list of parts you need to print to upgrade MK3.5S to MK4S. Because I use my printer in an enclosure I will print all of the parts in PCCF. My enclosure is modified with automatic enclosure heater so my enclosure goes up to about 40 °C. This list include original material recommendations.
Print settings for this parts are if not stated otherwise:
0.2 mm STRUCTURAL
PETG
15% grid infill
All of these models can be found here.
Frame | y-belt-idler-R2 | |
y_motor_holder_R3 | ||
X-axis & X-carriage | x-end-motor-R2 | |
x-end-idler-R2 | ||
x-end-clip-R2 | 2 pieces | |
x-carriage-R2 | ||
x-carriage-clip-R2 | ||
Z-axis | z-bottom-left-R2 | |
z-bottom-right-R2 | ||
x-carriage-back-R2 | ||
x-carriage-cable-holder-cover-R2 | ||
x-carriage-cable-holder-R2 | ||
z-top-right-R3 | ||
z-top-left-R3 | ||
Nextruder | Heatsink-spacer-R1 | PCCF |
fan-case R2 | PCCF | |
fan-case-cover_R1 | PCCF | |
fan-shroud-mk4s_R1 | PCCF | |
fan-door-cover_R1 | PCCF | |
lb-cover-back_R3 | PCCF | |
lb-cover-right_R3 | PCCF | |
Y-carriage & Heatbed | y-rod-holder-R2 | 4 pieces PCCF |
y-belt-holder_R3 | PCCF | |
y-belt-holder-tensioner_R3 | PCCF |
I also have MMU3 on my mk3.5s so you will also need to print these files for nextruder. The print files can be found here. You can print main-plate-R2 also but I choose not to and buy MJF part from Prusa. If you don't have MMU3 use only the top list of parts.
CORE ONE & MK4 & MK3.9 Nextruder parts -R2 | idler-lever-A-R2 | PCCF |
idler-lever-B-R2 | PCCF | |
idler-nut-fs-R2 | PCCF | |
swivel-A-R2 | PCCF | |
swivel-B-R2 | PCCF | |
screw-guide-R2 | PETG |
Here is the list of all of non-printed parts you get with Nextruder from Core One+ after INDX upgrade:
Name | PCS. |
|---|---|
Loveboard | 1 |
Extruder main cable for Core One+ | 1 |
Bearing 693 2RS | 2 |
Pin 2.9x8.5 | 2 |
Tubular spacer 13.2x3.8x0.35 | 1 |
PG Assembly | 1 |
PG ring | 1 |
Mainplate (normal nextruder) | 1 |
Extruder motor | 1 |
Spacer 5x10x0.1 | 1 |
Socket set screw M3x25 | 1 |
Heatsink with loadcell | 1 |
Filament sensor | 1 |
NTC heatsink thermistor + M3x4 set screw | 1 |
Spring 15x5 | 2 |
Spacer 6x3.1x8 | 1 |
Hotend fan | 1 |
Hotend assembly | 1 |
Thumb screw | 2 |
Also missing from the list are screws. You get all sort of screws but all of them are M3 ranging from 6 mm to 40 mm (6,10,12,16,18,25,30,40). Also there are M3n and M3nS nuts.
For the additional parts that needs to be bought in addition to nextruder:
Name | Pieces | Price total[€] | Note |
|---|---|---|---|
Extruder main cable | 1 | 19.9 | |
LM10UU | 2 | 7.98 | |
Rubber pad 20x10x1 | 6 | 1.99 | 1 packets; each has 6 pieces |
GT2-20 idler pulley | 1 | 5.79 | |
Smooth rod 10x325 | 2 | 24.98 | |
Rubber pad 42x42x2 | 1 | 1.99 | |
Hex spacer set | 1 | 3.99 | |
Trapezoidal nut | 2 | 13.94 | |
Zip ties | 10 | ||
Mainplate (for MMU3) | 1 | 13.99 | If you have MMU3 |
Fitting M5-4 | 2 | 5.5 | If you have MMU3 |
Magnet 3x1 | 2 | 3.98 | If you have MMU3 |
MK4S fan holder | 1 | 9.89 | |
MK4S print fan | 1 | 11.89 | |
Stepper motor Y-axis | 1 | 41.99 | Optional |
Stepper motor X-axis | 1 | 41.99 | Optional |
Nylon 3x555 | 1 | 1.29 | |
M3nS | 22 | 3.98 | 2 packs of 15 |
M3n | 8 | ||
M3nN | 2 | ||
M3x12 | 3 | ||
M3x10 | 34 | ||
M3x30 | 9 | ||
M3x18 | 11 | ||
M3x25 | 4 | ||
M3x16 | 4 | ||
M3x6 | 2 | ||
M3x40 | 1 | ||
Spare parts MK4S set | 2* | 12.29 | |
Rubber pad 42x42x2 | 1 | ||
Thermal pad | 3 | ||
Rubber pad 20x10x1 | 1 | ||
Pin 2.9x8.5 | 1 | ||
Pin 2,9x20 | 2* | ||
Hex spacer | 1 | ||
Bearing clips set with pads | 1* | 5.09 |
*-CHECK THE EDIT BELOW
Spare parts MK4S set contains more parts but those aren't needed for the upgrade.
There are also parts that I cannot find on the store:
Name | Pieces |
|---|---|
M3x20rT | 2 |
M3x8sT | 2 |
M3x5rT | 5 |
M3x22 | 2 |
M3x35 | 2 |
Need to source them elsewhere.
I will use this opportunity to change out belts, trapezoidal nuts and other parts that wear off. You don't have to change X and Y motors. If you don't you will have MK3.9S. Z motors are the same with different connector. If you already have MK3.5S then you have adapters from Z motors to the mainboard. You will also need roll of PCCF and PETG. You can use extruder cable from Core One+ since to my knowledge it is the same cable but longer. You will need to ziptie the cable cause it will drag and it might interfere with Y axis. I choose to buy new cable.
Total upgrade for me was 100€+VAT with MMU3 parts (I choose to get all replacement parts also so that is why my cart is more expensive). If you add motors for full MK4S the price is 200€ + your country VAT. If you have Nextruder from INDX this is a great upgrade. If you plan to buy nextruder, for me you need to buy it sub 150€ so that a total comes to 350€ tops. If you buy every part by itself from prusa store new the total comes to 310€+VAT without X and Y motors (with motors 374€+VAT). You still need PCCF spool which is 53€+VAT or ASA + PETG spool in both cases.
Use assembly guide for MK4S, a bit from every chapter depending what are you upgrading.
Also I made a quick remix of Z motor holder to have way smaller holes so that debris doesn't get into the motors.
Let me know in the comments if I missed anything. I will upload pictures + YT video of assembly. In the files there is excel spreadsheet with all parts and calculations as well as picture of my cart.
EDIT 1: I ordered only 1 rod for Z axis... quantities in the tables are correct
EDIT 2: You need 2 * 2.9x20 pins and the correct quantities are in the table... The best way is to buy 2 spare kits for mk4s or to grind of the head of M3 screw; I had some fi3 rods laying around
Also you will need to replace bearing clips on Y axis because the carriage sits just a little bit higher then on the mk3.5s; there is a kit with 3 clips and pads; You probably have old y carriage like me so you will in addition need nyloc nuts for the carriage; use old ones or find spares because they don't sell them
I ground down new y motor holder so that it can clear the carriage and it works fine