Ender 3 v2 Lightbar (With room for Tool Holder)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A lightbar for the Ender 3 v2. Designed around a Tool holder (Linked in the description)
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 68
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Public Domain
What you need
4x M4x12 screws
4x M4 T-Nuts (printed ones linked) ""printed ones not tested""
1x 1'0.5" ft/31.750 mm of 17X8mm LED Aluminum Extrusion**
1x 1-2 ft of 24 volt LED strips
1x Rocker power switch**
Wire -- enough to reach motherboard
** = Images provided for dimensions
Tool Holder Link https://www.thingiverse.com/thing:3877505
M4 Nut Link https://www.printables.com/model/62129-t-nut-m3-m4-m5-for-20mm-profile
Printed in PLA Plus
Standard print setting
Printing recommendations
Filament - PLA, PETG
Supports - Everywhere, No tree supports
Standard setting for everything else
Build Instructions
1. Stick light bar to aluminum extrusion
2. Insert light bar into the right side holder
3. Run negative wire to the back to the printer
4. Wire positive wire to rocker switch then run wire to back of printer
5. Run wires below Z axis mount
6. Run wires out above Z axis motor
7. Run the wires below the printer to the motherboard
8. Connect the positive wire to the positive dc voltage in
9. Connect the negative wire to the negative dc voltage in
10. close everything up and you are done