Dust port adapter WEN JT630H 6" Jointer to 4" Duct
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dust port adapter for the WEN JT630H 10-Amp 6-Inch Spiral Jointer. Replaces the undersized OEM 2-1/2" dust chute with 4"
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 30
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v3.0
Summary
Custom dust port adapter for the WEN JT630H 10-Amp 6-Inch Spiral Benchtop Jointer. Replaces the undersized OEM 2-1/2" dust chute with a proper 4" connection for your dust collection system. Single-piece design — no glue, no assembly.
The Problem
The WEN JT630H comes with a tiny 2-1/2" dust port that constantly clogs and provides inadequate chip evacuation. This adapter replaces the OEM chute entirely and transitions to a standard 4" (95mm ID) round duct connection, dramatically improving airflow and chip collection.
Design Details
Single-piece construction — prints as one part, no assembly required
Direct bolt-on mounting — uses the existing jointer mounting bolts via 4 open-ended slots (slide on/off without fully removing bolts)
Flange plate: 185 × 98 × 4mm with 149 × 62mm rectangular opening
Smooth rectangle-to-round transition: 50mm loft from rectangular opening to circular exit
Round exit: 95mm ID / 101mm OD — standard 4" flexible duct slides directly inside
Mounting slots: 9.6mm deep × 7mm wide, positioned 5mm from the long edges
Dimensions
FeatureMeasurement
Flange plate185 × 98 × 4mm
Opening149 × 62mm
Round exit ID95mm (4" duct inserts here)
Round exit OD101mm
Transition height50mm
Round stub length25mm
Total height79mm
Print Settings
Material: PETG recommended (workshop durability, vibration resistance)
Layer Height: 0.2mm
Infill: 25-30%
Walls: 3-4 perimeters
Supports: None needed (print with flange flat on bed)
Orientation: Flange plate down on build plate
Bed size required: 185 × 101mm minimum
Installation
Loosen (don't remove) the 4 mounting bolts on the jointer's dust chute area
Slide the adapter's open-ended slots over the bolts
Tighten bolts to secure
Insert your 4" flexible dust collection hose into the round stub
Optionally seal with a hose clamp for a tighter fit
Compatibility
WEN JT630H (confirmed fit)
May fit other WEN 6" benchtop jointers with the same chute dimensions
Round exit accepts any standard 4" (100mm) flexible dust collection hose
Files
.scad — Parametric OpenSCAD source file (all dimensions adjustable)
.stl — Ready-to-print mesh
Customization
The OpenSCAD source file is fully parametric. You can adjust:
round_id — change if your duct is a different size
flange_border — adjust mounting flange width
transition_height — make the transition longer/shorter
slot_depth / slot_width — adjust for different bolt configurations