3 Row MOLLE to Tek-Mount Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D printable model of the Blade-Tech 3 Row MOLLE to Tek-Mount adapter (Slotted Post and T-Post)
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
I threw together a 3D printable model of the Blade-Tech 3 Row MOLLE to Tek-Mount adapter (Slotted Post and T-Post) because I needed two extras last minute. I used the 3/16" Slotted Posts that came with the Blade-Tech Tek-Mount hardware but I've also designed a version that can use 3/16" T-Posts (not tested but should work). Please show support to Blade-Tech as well, their Tek-Mount system is great!
Links to 3/16" Slotted Posts / 3/16"T-Posts and 5/16 Truss Head Screws (any post/screws with the same measurements should work as well):
https://www.holstersmith.com/vcom/slotted-post-steel-black-oxide-01875-p-13988.html
https://www.holstersmith.com/vcom/post-stainless-steel-black-zinc-1875-200-p-13998.html
https://www.holstersmith.com/vcom/phillips-truss-head-black-oxide-3125-375-1ea-p-5786.html
Print settings I used:
Layer Height: .20 mm STRUCTURAL
Infill: 100% Aligned Rectilinear
Support: Support on build plate only