Flush-end Ruler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I took the original model and removed the ends to turn it into a flush-end ruler. This way the line starts immediately
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 17
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This is a ruler model that was modified to make it a flush-end ruler - the measurement starts right at the edge of the ruler rather than there being a gap from the edge to the first measurement line.
I recommend using a lighter color for the body of the ruler itself and then filling in the numbers with a darker color. I went with gray for the ruler and black for the numbers and lines.
Any filament will do. I recommend using a smaller layer height due to the details. I used 0.16mm. This will increase the print time significantly but you'll find that it is worth it.
My printed example is not a reflection of the quality of the model. I realized at the last second I only had so much gray so I had to reduce the amount needed. Your's will be much nicer!