Charging/Data Dock for Xiao nRF Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Charging/Date Cradle for the Xiao nRF enclosure for sma antenna meshtastic meshcore
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 8
- Makes
- 0
- Views
- 81
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a charging cradle for the Xiao nRF enclosure for sma antenna meshtastic meshcore by @dremial_8 which I created combining the stand and this model by @BradAustin which allows the device to stand upright while charging or while it is hooked up to a computer. It uses these right angle USB-C connectors and the base is secured with 4 x M3-8 screws and 4 x M3-4 heat Inserts.
Print with the flat bottom facing down and supported. The supports aren't the easiest to remove unfortunately, but it'll work. I use 3 interface layers and that helps.
I recommend printing these with at least 3-4 walls as the heat inserts will have a lot of pressure pulling on them as you tighten on the base and I have found they stay in better with more than 2 walls. I also recommend printing at a higher infill for weight and stability.