Seam-Allowance Scissors (Nahtzugabe Schere)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A handy tool to add the seam allowance while using the scissors without having to mark everything twice.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 2
- Makes
- 0
- Views
- 59
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Description
Handy tool to add the seam allowance during cutting with the scissor.
The tool is mounted to the scissor with a strong magnet to ensure, it's not moving.
There are some pre set distances:
10mm
20mm
25mm
30mm
Those distances can be fixed with the screw.
Parts
All the parts were ordered from Amazon. Nothing special here, so I won't add links to it.
1x round 5x1mm Neodym magnet for the round base
1x cubical 5x5mm Neodym magnet for the cubical base
1x M3 Nut
1x M3 Screw
some super glue
Building
Put the Nut inside the cutout on the mover and fix it with some super glue. Additionally, if it doesn't fit 100%, heating the nut up, will do the trick. Then most of the time no superglue is needed.
Put some super glue inside the hole for the neodym magnet and glue it together. Do not heat the magnet up, if it doesn't fit. The magnet will loose it's strength due to the heat.