GabeCube Steam Machine Faceplate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A faceplate for the Steam Machine dipicting Valve founder Gabe Newell.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 3
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Turn your Steam Machine into a true GabeCube with this custom Steam Machine Faceplate dipicting Valve's founder Gabe Newell. The models shown here use the same magnets and screws that are used in Valve's Inkterface project. Included is an additional blank Faceplate so that you can create your own custom faceplate for your Steam Machine.
Print Settings
Filament: PETG filament or ABS
Layer height: 0.2 mm
Infill: 20-30%
Required Hardware
Assembly Instructions
Place the four Mag-Inserts into the Faceplate, and insert your four K&G Magnetics SB443-OUT Magnets into the inserts. (Their should be 4 magnets in each corner.)
Position your Rear Panel over the rear of your Faceplate.
Secure your Rear Panel to the Faceplate with your eight M2.6 x 5 mm Machine Screws.