Carvera Air SST Lube Cube Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular SST Lube Cube mount for the Makera Carvera Air
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 36
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought a SST Lube Cube for my Carvera Air and wanted to design a more modular mount for it.
It has two printed parts: a bracket that bolts over the spindle cooling fan, and a brace that holds the Lube Cube. The brace has a channel along the side (secured with an M6 bolt into the side of the Lube Cube) so you can slide the Cube up and down and set the distance and angle you prefer.
Install
Remove the 4 screws holding the spindle cooling fan on. You'll reuse the fan, but you need M4 screws about 5mm longer than the stock ones.
Drill a hole through the mesh filter holder on top of the fan so the bracket can seat over it and the M4 bolts can go through it.
Bolt the bracket down over the fan with the 4 longer M4 screws.
Slide the Lube Cube into the brace.
Attach the brace to the bracket with the M6x35 screw and nut. Don't tighten the nut all the way, so the brace can still pivot.
Thread the M6x8 bolt into the side of the Lube Cube to lock it in the brace channel at the height you want.
Hardware
4 M4 screws, about 5mm longer than the stock fan screws (~M3x45)
1 M6x35 screw and nut (brace to bracket)
1 M6x8 bolt (locks the Cube in the channel)
I've only tested this on my own Air, so if something doesn't fit on yours, let me know and I'll adjust as needed.
Happy printing!
Like what I do and want to support me? Buy me a coffee!