1 / 6
Prusa CORE One Magnetic Lid Corners – Anti-Warp — image 1
1 / 6

Prusa CORE One Magnetic Lid Corners – Anti-Warp

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Magnetic lid corner reinforcements for Prusa CORE One, preventing heat warping with 5x5mm magnets.

Rating
5 / 5
Likes
12
Downloads
37
Makes
3
Views
379
Reviews
4

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Prusa CORE One Magnetic Lid Corners – Anti-Warp

A simple upgrade for the Prusa CORE One top lid that combines magnetic attachment with additional corner reinforcement.

Over time, prolonged exposure to heat can cause the original top lid to warp or deform. These magnetic corner pieces help reinforce the lid and reduce bending, while also making the lid easier to attach and remove.

🔧 Features

  • 🧲 Magnetic lid attachment – requires 4 cylindrical 5 × 5 mm magnets, one for each corner, which attract to the existing screws in the CORE One

  • 🛠 No screws required – the printed parts simply press into the existing holes in the lid.

  • 📌 Snap-fit installation – integrated plugs provide a tight friction fit, so no modifications or additional hardware are needed.

  • 🔥 Anti-warp reinforcement – strengthens the corners of the lid and helps prevent deformation caused by prolonged heat exposure.

  • ♻ Fully reversible – installation does not require drilling, gluing, or permanently modifying the original lid.

  • ⚡ Quick installation – simply insert the four parts into the existing holes and install the magnets.

🧲 What you need

  • 4× cylindrical magnets – 5 × 5 mm

  • 4× printed magnetic corner pieces

  • No screws or additional hardware required.

The magnets are held inside the printed parts and attract to the existing screws in the CORE One, keeping the lid securely in place.

🖨 Printing

The parts are designed to be printed without supports in normal conditions, provided that the “Make Overhangs Printable” feature is enabled in OrcaSlicer.

⚠ Important:

For reliable printing and sufficient strength, I recommend using PETG with 4 wall loops. The plugs are designed for a tight press fit in the existing lid holes, so PETG helps prevent them from breaking during installation.

For easier and more reliable printing of the small overhanging features, I also recommend enabling “Make Overhangs Printable” in OrcaSlicer.

The exact print settings can be adjusted according to your preferred filament and printer profile.

💡 Why I made this

I noticed that the Prusa CORE One top lid can gradually deform after being exposed to elevated temperatures for longer periods of time.

Rather than modifying the original lid or adding screws, I wanted a simple solution that would:

reinforce the lid → prevent warping → keep the magnetic attachment → require no permanent modification.

This is the result.

A small, simple upgrade designed specifically for the Prusa CORE One.

🛠 One More Thing

I’m also including the FreeCAD source file, so you can easily make your own modifications — for example, to adjust the magnet dimensions to fit the magnets you already have available.

❤ Enjoy!

I hope this little upgrade helps keep your Prusa CORE One lid straight and secure.

If you find this model useful, I’d really appreciate a like or a comment. And most importantly, I’d love to see your makes and photos — so feel free to share how your print turned out!

Happy printing! 🖨

Tags